Jika pengguna PCLinuxOS ada yang mengalamai hal seperti ini yaitu tidak bisa/berfungsinya "KLIK" pada touchpad PCLinuxOS yang anda gunakan maka kesempatan kali ini saya ingin memberikan cara bagaimana meng-enable kan atau membuat berfungsi touchpad pada PCLinuxOS yang kalian gunakan. Saya memakai Distro PCLinuxOS pada pada netbook Toshiba NB505.
Buka terminal:
# kwrite 50-synaptics.conf
masukkan baris script berikut [script ini yang saya gunakan pada netbook saya]:
- Section "InputClass"
- Identifier "touchpad catchall"
- Driver "synaptics"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- #Option "Device" "/dev/input/mouse0"
- Option "Protocol" "auto-dev"
- Option "LeftEdge" "1700"
- Option "RightEdge" "5300"
- Option "TopEdge" "1700"
- Option "BottomEdge" "4200"
- Option "FingerLow" "25"
- Option "FingerHigh" "30"
- Option "MaxTapTime" "180"
- Option "MaxTapMove" "220"
- Option "VertScrollDelta" "100"
- Option "MinSpeed" "0.20"
- Option "MaxSpeed" "1.00"
- Option "AccelFactor" "0.15"
- Option "SHMConfig" "1"
- Option "VertTwoFingerScroll" "1"
- Option "HorizTwoFingerScroll" "1"
- Option "VertEdgeScroll" "1"
- Option "HorizEdgeScroll" "1"
- Option "TapButton1" "1"
- Option "TapButton2" "2"
- Option "TapButton3" "3"
- EndSection
*Jika script diatas tidak berhasil bisa coba 1/1 script yang ada dibawah ini*
*script 1*
- Section "InputClass"
- Identifier "touchpad catchall"
- Driver "synaptics"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- EndSection
*script 2*
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
#Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
LeftEdge=120
RightEdge=830
TopEdge=120
BottomEdge=650
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.20"
Option "MaxSpeed" "1.00"
Option "AccelFactor" "0.15"
Option "SHMConfig" "1"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1"
Option "VertEdgeScroll" "1"
Option "HorizEdgeScroll" "1"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
*script 3*
- Section "InputClass"
- Identifier "touchpad catchall"
- Driver "synaptics"
- MatchIsTouchpad "on"
- MatchDevicePath "/dev/input/event*"
- #Option "Device" "/dev/input/mouse0"
- Option "Protocol" "auto-dev"
- #Option "LeftEdge" "1700"
- #Option "RightEdge" "5300"
- #Option "TopEdge" "1700"
- #Option "BottomEdge" "4200"
- Option "FingerLow" "25"
- Option "FingerHigh" "30"
- Option "MaxTapTime" "180"
- Option "MaxTapMove" "220"
- Option "VertScrollDelta" "100"
- Option "MinSpeed" "0.20"
- Option "MaxSpeed" "1.00"
- Option "AccelFactor" "0.15"
- Option "SHMConfig" "1"
- Option "VertTwoFingerScroll" "1"
- Option "HorizTwoFingerScroll" "1"
- Option "VertEdgeScroll" "1"
- Option "HorizEdgeScroll" "1"
- Option "TapButton1" "1"
- Option "TapButton2" "2"
- Option "TapButton3" "3"
- EndSection
*script 4*
- Section "InputClass"
- Identifier "touchpad catchall"
- Driver "synaptics"
- MatchIsTouchpad "on"
- Option "TapButton1" "1"
- Option "VertEdgeScroll" "1
- EndSection
--> [save as] simpan script ini pada direktory --> /etc/X11/xorg.conf.d/ yang diberi nama --> 50-synaptics.conf --> "save replaces" --> reboot/restart
Semoga bermanfaat :)
Do you like this article? Share It!
cidtux says:
tambahan om biar lebih mudah install saja kcm_touchpad dari synaptic... nanti.. pengaturannya bisa lewat GUI, di kde control center (ada tambahan menu touchpad)... :D
willy says:
Ok sip..makasih masukkannya om :)